Search the Community

I'm currently setting up my car. I've made the loom from original XU10J4 wiring. I still have couple of questions open. 1. Ignition settings -I've the original coil on plug setting with original ignition modules so running with wasted spark. How should I config the ecu settings? Distributor Fitted: No External coil amps: Yes but then what? -What should I put to "Coil On Time"? It should be something between 1000-5000 micro secs. -The ignition map I have map made by petert for XU9J4 as a starting point, but probably I'll have to retard the ignition timing to be safe. Is that right, if yes how much should I retard? I have lots of compression roughly 11.5, but also cat cam 526 inlet cam. Eventually the car will be tuned by professional, but need to get it running safe and sound first. 2. Flywheel sensor settings - 60-2, but what should I put to gap tooth factor? 2000 is the right value, (read it from the s60 manual) - "Firing Tooth On Startup" Teeth BTDC 0-5? Apparently ignition timing is fixed on specific tooth during cranking. What should try first? 1, again from the manual - "Flywheel Mode" The car has standard missing tooth flywheel and single tooth cam. There is no such an option to choose? 3. What is the injector dead time of standard injectors?