Front end has recently felt unstable and nervous with poor turn in
Suspension is fixed platform forest GP N bilstein inserts/springs and mounts. engine 1.9 with transx diff, rear is solid mounted
Relatively new front wheel bearings, rear axle rebulit last winter
Done a geoemtry check of the front and rear of my road raly 205 ( haynes says front canber should be 0 plus or minus 0.5 degree)
Found rear cambers within normal alignment but front right was giving 1 degree neg front left was 0.2 neg. Toe in set as parallel.
Not sure if strut is bent or something else that is give this amount of camber
Not stripped it down yet, Any thoughts as to what to look for?