Search the Community

Hi, I now own a Gentry. Not sure if this would be the correct forum for a Gentry model ( and please direct me to a better place if it exists) but here goes: my drivers side door trim was glued/siliconed on. It appears to also have some black double sided tape to and bottom is this tape original. I have found mention on this site of the correct clips but nothing about tape. Please find attached a link to a YouTube vid of the situation. Thank you anyone in advance. YouTube vid link .txt

Hi Guys and Gal's! My father has a problem with the cooling fan not coming on in his Gentry turbo. It has the blue 3 pin connector and we replaced it with a new one a few days ago. The wiring for the fan is much more involved than my GTI, its located in a black box behind the pass headlight. There are 2 relays? in there and plenty of wires. I tested the fan but the only way I could run the slow and fast was to disconnect the plug on the thermo switch turn the ignition to the second click then link them out on the plug. Both speeds worked so assumed it was the switch, but after replacing it the fans still don't come on! My father insists its my fault because it has only done it since I wired in a spiky rev counter loom, but I never connected it tot he multiplug in the end!! Is there something a miss here, particularly with the way I had to test the fan motor??? I will take the thermo switch out and test it in hot water, my worry is that does the ignition have to be on for the fan to work!!!??? Thanks in advance, Mike