Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

309 GTI 1.6
allanallen
By allanallen, 03/07/2013
  • 2,810 views
  • Country United Kingdom
  • Color White
  • Year 1988
  • Short Description It's a phase 1 309 xs!
  • Car Type / Usage Trackday car
  • Engine & Gearbox Standard Xu10j4rs, 16 row oil cooler, custom twin box centre run/exit stainless exhaust, baker mounts, butchered engine mount with custom mounted alternator. Lynx bottom pulley, walbro 255 fuel pump, blanked resonator, vac pump and t body heater, vac pump, 'flipped' fuel rail.

    1600 be3 gearbox with gripper plated LSD, mi16 Valeo clutch, rose jointed gear linkages, bronze bushed pivots
  • Suspension & Steering Gaz golds with 500lb 6" springs
    25mm tbs, 28mm arb
    21mm front arb
    Bridgecraft neg camber hubs
    Bridgecraft neg camber tailing arms
    Bridgecraft roll centre correction kit
    Bridgecraft bumpsteer correction kit
    Raldes spherical bearing top mounts
    Custom beam mounts
    3.2 pas rack, 106 electric pump
    Seam welded subframe
    Pony strut brace
  • Brakes Front Hi spec R114 calipers custom mounted on 266 206/306 brembo disks, m1155 pads
    Rear standard calipers, oe pug pads, brembo disks
    Gingerspeed bias pedal box
    Braided lines throughout
  • Wheels & Tyres All standard 1.9 wheels with r888s, Michelin slicks or wets
  • Bodywork & Exterior Gti trims, bumpers with blanked fogs, glass, phase 2 grill
    Xs and phase 2 gti spoiler
    Lightened bonnet, doors, boot lid, bumpers, mounts etc etc
    Poly door windows
    Roof vent
    Bit of light weight racing rust
  • Interior & ICE Weld in roll cage, double door bars, dash bar, harness bars etc
    Chopped tunnel and seat bars
    Motordrive buckets and willans 3" harnesses
    No dash, small ally centre console, electric demisters
    Lowered steering column and dished suede wheel
    6 gallon 'sumped' fabricated fuel tank sunk into rear seat well
    Battery sunk into boot floor
    Beaded seat cover
  • Comments & Plans Future plans- Mi16, better brakes, lower,lighter,box in the fuel tank to meet msa regs.

×