Wanted: Diesel Wiring Schematics Rpm Gauge To Sensor

[lybker 26 2 Cars]

Please help me find wiring schematics for a 205/309 turbo diesel from instrument cluster to rpm sensor in enginebay.

 

Thank you in advance :-)

[Richie-Van-GTi 71 2 Cars]

is it covered by haynes?

http://www.buzzboxx.co.uk/Haynes_205.pdf

 

if not it should be same as a 306 td etc.

tdc sensor would be pin 3 earthed shield , pins 1 and 2 go to the tachometer, either way round should work but one way always works better than the other so fluctuating rpm should be cured from reversal. The tachometer will also have a power feed but from memory this is through the rest of the guages anyway so shouldnt be an issue.

Edited January 9, 2009 by Richie-Van-GTi

[lybker 26 2 Cars]

Thx for the reply - sadly there are no diesel models in the haynes book :-(

 

Your theory about pin-layout seems highly plausible - but still if any do have a wiring scheme - please share it with me - thx in advance!

Edited January 12, 2009 by lybker

[Richie-Van-GTi 71 2 Cars]

I took that direct from the 405 wiring schematics

[lybker 26 2 Cars]

nice - do you by any change know what is the sparepart number for the sensor?

[jimistdt 1]

I bought the Haynes "Peugeot/Talbot Diesel Engine #950" from an ONLINE store. I only paid about £7 for a used one

[lybker 26 2 Cars]

I bought the Haynes "Peugeot/Talbot Diesel Engine #950" from an ONLINE store. I only paid about £7 for a used one

 

u shouldn´t by any chance have a scanner - do you? ;-)

[jimistdt 1]

No, mate unfortunately not. Plus I cant read them well enough to tell you what you need to know.

 

Maybe Welshpug on here can get access to one.

 

 

I will say though, when I ordered mine I had it within 2 days, and they are worth having.