porter_bmx 0 Posted December 28, 2008 hi, i'm currently running the brake lines through my car and im not sure if i just use a standard male fitting into the t peice?? can any one help?? pictures would be great thanks steve Share this post Link to post Share on other sites
mrswampy 0 Posted December 28, 2008 Yes use m10 male fittings just make sure the seat base are the same on both fittings Share this post Link to post Share on other sites
porter_bmx 0 Posted December 28, 2008 inside the t peice is what looks like a counter sink, the fittings are flat on the bottem. Share this post Link to post Share on other sites
marksorrento205 80 Posted December 28, 2008 (edited) The inside of the t -piece should have a concave face which as you said is like a countersunk. You will need a convex fitting to seat with the concave face of the t - piece. Its a male - female scenario. Male being convex, female being concave. The pics below should help. Rally design sell a load of different fittings Rally design - brake pipe fittings Convex seat Concave seat HTH's Edited December 28, 2008 by marksorrento205 Share this post Link to post Share on other sites
porter_bmx 0 Posted December 31, 2008 cheers its all plumbed in now Share this post Link to post Share on other sites
