marksorrento205 80 Posted December 22, 2008 Now before I get slated, this is for info only. I found these on ebay and as there has been loads of questions about mounting seats though it might be helpfull. I dont know what they are like or the quality Seat rail kit Share this post Link to post Share on other sites
Baz 421 Posted December 22, 2008 Look alright to me tbh! Share this post Link to post Share on other sites
marksorrento205 80 Posted December 22, 2008 I agree baz. For a kit that you can weld to suit your car and seats, thats made from cds tubes, cant go wrong. Share this post Link to post Share on other sites
boombang 2 Posted December 22, 2008 Cheaper on their website though http://www.motorsport-tools.com/index.php?...products_id=567 Share this post Link to post Share on other sites
marksorrento205 80 Posted December 22, 2008 cheeky bastards Share this post Link to post Share on other sites
philfingers 5 Posted December 23, 2008 looks good, some nice other kit too. You can always make them yourself. I used 20mm box section 3mm I think and then when you drill the holes through to bolt the seats to the rails you need to insert some little bosses to stop the tighteneed bolts squashing the tube. Reinforce to sills. Only thing is using this method (not the seat rail kit you have mentioned) is that your measurements need to be cock on as there's no adjustability in the hole position, unlike the floating captive nuts these use. personally, if they're not nylocs (and they probably won't be) then make sure you lockwire the bolts in. Share this post Link to post Share on other sites
marksorrento205 80 Posted December 23, 2008 (edited) personally, if they're not nylocs (and they probably won't be) then make sure you lockwire the bolts in. Lockwiring bolts - now thats something im good at There stuff does seam to be good quality stuff. It was the cds tube that caught my eye. Heard it talked about a lot on here. Edited December 23, 2008 by marksorrento205 Share this post Link to post Share on other sites
