jtek 0 Posted December 17, 2008 I am after a 3 port (2 front one back) master cylinder for my 205. It is currently using 266mm front brakes from a 306 HDI, and rear drums, and up until now I have been using a 2 port S16 item (22mm), which was messy from piping terms and a bit old anyway. Anybody run this setup and have a particular favourite 3 port item? I had thought of a 406 (23.8mm?) but I wasn't sure if this would be a OTT. Many thanks Share this post Link to post Share on other sites
welshpug 1,657 Posted December 17, 2008 (edited) I just use just a £30 odd 20.6mm Bendix one, same part as a Mk2 glof (standard calipers) I don't think you'll need a larger MC as the HDI doesn't use big pistons like the GTi6, same 54mm as the 1.9 and the 206/307 jobbies I'm sure. Edited December 17, 2008 by welshpug Share this post Link to post Share on other sites
