swinney88 0 Posted December 2, 2008 after replacing my nackard valve i have put everything back together. After eventually sorting my firing order my car was running nice it's a 1.9 8v. I went out to it tonite as i have work in the morning and needed some petrol fired it up and it wont rev press the accelerator fully and the rev's will rise about 200rpm i.ve tries adjusting the throttle cable incase it was to loose and pressing the accelerator was just taking up the slack. any help appreiciated as i'm going to have to get the bus to work again in the morning. Share this post Link to post Share on other sites
EdCherry 34 1 Cars Posted December 2, 2008 have you tried moving the butterfly by hand, e.g. rotate the white spring block. Share this post Link to post Share on other sites
steve@cornwall 100 Posted December 2, 2008 Double check your valve timing Share this post Link to post Share on other sites
