Where Can I Find A Fg Bonnet Bulge?

[Spiky 37]

it only needs top be small as in around 2" wide 10-15mm tall and 2" long

 

it's just to cut my bonnet to allow clearance for my top mount strut nut

 

 

any idea's?

 

bit like the mk5 rs2000,

 

 

pics on my Project thread and you can see why..

[dirtdog 4]

I don't know of any decent looking ones TBH. If you HAVE to do it i'd probably go for a carlos seinz vent or something similar...

[welshpug 1,655]

Ripspeed?

[Spiky 37]

I don't know of any decent looking ones TBH. If you HAVE to do it i'd probably go for a carlos seinz vent or something similar...

 

 

just googled that, thats a massive vent.

 

i only want a small bulge

 

will hardly be noticeable

[dirtdog 4]

make a custom one

[Rich_p 23]

I think the rover 200 coupes had a bulge in the bonnet.

[Spiky 37]

i would make one, but i never worked with FG,

 

there used to be a FG place near me, but it's gone now

 

rover 200, ah yeah they did

[EdCherry 34 1 Cars]

Ripspeed?

 

QUOTED FOR THE TRUTH.

[Spiky 37]

found what i need

 

http://www.m-99.co.uk/Car_Bodykits/B...air_vents.html

 

near the bottom

 

cheers everyone

 

 

ps nothing on ripspeed, unless i was looking in the wrong section?

[Foltan 0]

just put something over the topmount then slam the bonnet down hard. hey presto - bonnet bulges

[Spiky 37]

and what impact do you think that will have with my new Fibre glass bonnet.... lol

[Spiky 37]

problem solved now anyhow

 

Edited December 5, 2008 by Spiky

[tracktoy 0]

rover ones for me dude

 

the more angular design would work better with the look of the 205 imo

 

 

 

finaly made it onto the board and the was my first post

[DrSarty 90 1 Cars]

finaly made it onto the board and the was my first post

 

Yay . Welcome you fiery Welsh character you.

 

So what was the fix Spiky? I see no bulges or vents or am I being doopid?

[Spiky 37]

lol welcome paul

 

i put the bonnet and stamped on it a few times, the strut nut cam through, but the bonnet is nice and flat now

 

and the strut brace is now fitted all good

Edited December 8, 2008 by Spiky

[tracktoy 0]

Yay . Welcome you fiery Welsh character you.

 

So what was the fix Spiky? I see no bulges or vents or am I being doopid?

 

what me???? i just got a bit frustrated at the simple sign up procedure

 

 

lol welcome paul :D

 

i put the bonnet and stamped on it a few times, the strut nut cam through, but the bonnet is nice and flat now

 

and the strut brace is now fitted all good

 

 

pmsl- have a look at a 6r4 bonnet, its the way forward