Hoping Of A Rebuild With Parts Lying Around

[justinv 4 1 Cars]

1.9 engine

lightened and balanced crank and flywheel

lightened rods and pistons

double valve springs

1.6 gearbox

 

additional

 

ECU and camshaft.

 

Any ideas how to swap stuff around ....... and would a good working 1.6 brake setup be enough ?

[pug_ham 244 3 Cars]

What exactly are you looking at swapping, 1.6 to 1.9?

 

The parts listed above all sound fine for this use if thats what your asking.

 

A good set of 1.6 GTi brakes will be fine, they are the same size as the 1.9 brake discs & if the Bendix calipers are in fine fettle they'll be more than enough. I ran the 1.6 Bendix stuff on my 1.9 track car without any problems & only swapped due to fitting 309 front wishbones & driveshafts.

 

Graham.

[justinv 4 1 Cars]

Yes swapping to a 1.9 ....... to get some extra crunch out of it think all i have to change besides that is the afm right ?

[pug_ham 244 3 Cars]

You won't need double valve springs for an otherwise straight swap for the bnits listed above unless you are fitting some high spec cam but the correct 1.9 injectors & AFM are all worth swapping at the same time.

 

Graham.