Different Disk Offset On Zx Arms?

[felix2566 2]

Last weekend I fitted some ZX arms to my 309, they already had the disk break hubs on them. The ZX disks where shot so got thrown away ages ago, so i used my 309 ones, but when I came to fitting the calipers to them the caliper had to be moved to the maximum in towards the car to fit on the disc.

 

Do ZX discs have a different offset which would allow the caliper to sit centally on the slider like it should be?

[welshpug 1,657]

yes, due to the ABS rings, they may not be fitted, but they all have hubs spaced out by 5mm or so IIRC (longer stub pins and a thicker spacer between bearing and arm)

[felix2566 2]

So I would need disks from a zx? Yes?

[Anthony 1,003]

So I would need disks from a zx? Yes?

You either need to use 306/ZX/Xsara rear disks, or swap the rear hubs etc over to 205/309 ones if you want to use 205/309 disks.

[Baz 421]

Yup, i had the same problem recently, u need discs from an ABS equipped ZX/306, as Wp says, a little deeper.

[VisaGTi16v 1]

I happen to have a set of zx rear discs at home which I can measure for you if thats of any use although others have already answered you

[felix2566 2]

Thanks all, I think I will probably just get some zx/306 with abs rear disks, look like the easiest option!