Wishbone Bushes And Discs

[richors 0]

Had a bit of a mishap on track yesterday when 3 wheel bolts came out and ended up with smashed disc and stripped threads etc - could have been a lot worse though.

Anyway, on inspection today the wishbone bushes are shot on drivers side which is clearly why the car was moving around even in straight lines - metal tube in center has come away from the bush - so the questions are - do people reckon poly bushes or standard?

How much are wishbones complete compared to just bushes and where is best place to buy?

 

Also, now i need new discs, the ones i have removed are 283mm and the calipers have what look to be different mounting brackets on with 3mm spacers to ensure wheels clear the calipers.

When buying new discs can i assume the 206/307 ones are ok for bolt spacing etc to go onto 205 1.9 gti hubs etc?

Just want to be sure i get correct ones. Again, where is best place to buy?

 

thanks for any help.

 

cheers

[swordfish210 20]

The genral concencus is that the genuine pug bushes are better than the poly bushes. they're stiffer, cheaper and they last longer.

[richors 0]

The genral concencus is that the genuine pug bushes are better than the poly bushes. they're stiffer, cheaper and they last longer.

 

Cheers - will get those then.

 

Just need to sort discs now

 

txs

[boombang 2]

The bushes come in a pack from pug with new bolts, far far cheaper as a kit rather than individual bushes.

 

Can't remember the part number but should come up on a search - has been covered so many times.

[pug_ham 244 3 Cars]

Richors, the part number for the bush kit is 3599.07, costs approx £20 for enough bushes to do both wishbones & comes with new nuts & bolts.

 

Infact the kit is cheaper than buying two of the wishbone bushes individually.

 

Graham.

[richors 0]

Cheers Graham.

 

How are you by the way - not seen you at trackdays recently. Still doing many?

 

Txs

 

Mark.