porter_bmx 0 Posted October 22, 2008 hi, has anyone got the dimensions to make a sump and petrol tank guard something like a technical drawing would be amazing. if so could you email me them at porter_bmx@hotmail.com. many thanks steven Share this post Link to post Share on other sites
bren_1.3 1 Posted October 23, 2008 are you still after these? i can give rough dimensions if you need. i use the peugeot sport stuff. Share this post Link to post Share on other sites
Anteas 0 Posted October 23, 2008 are you still after these? i can give rough dimensions if you need. i use the peugeot sport stuff. is there a web site were u can buy peugeot sport stuff ? Share this post Link to post Share on other sites
bren_1.3 1 Posted October 23, 2008 there is the special tuning website. (www.specialtuning.co.uk) but its expensive stuff and the very same items can be bought cheaper elsewhere. what exactly do you have in mind? Share this post Link to post Share on other sites
welshpug 1,657 Posted October 23, 2008 there's boutique peugeot sport which is a LOT cheaper for most parts than special tuning, but ideally you need to be fairly fluent in French Share this post Link to post Share on other sites
porter_bmx 0 Posted October 24, 2008 yea still after them, it would be great if you could give me the dimensions cheers Share this post Link to post Share on other sites
stuart 31 3 Cars Posted October 25, 2008 If you get hold of any dimensions / drawings let me know if you could as I'll be making a set very soon too. Cheers Stuart Share this post Link to post Share on other sites
Craigo 0 Posted October 27, 2008 there's boutique peugeot sport which is a LOT cheaper for most parts than special tuning, but ideally you need to be fairly fluent in French you got a link for these my man as el doris is fluent in the france talk, lol Share this post Link to post Share on other sites
bren_1.3 1 Posted October 30, 2008 im on with this mate, just give it till the weekend. work and uni is busy.. Share this post Link to post Share on other sites
large 33 Posted October 31, 2008 What are you thinking of making them from? Share this post Link to post Share on other sites
porter_bmx 0 Posted November 1, 2008 they will be made from ally 6mm thick was going to use 4mm but had none at work Share this post Link to post Share on other sites
welshpug 1,657 Posted November 1, 2008 Missed this thread sorry, but here's the link http://www.peugeotsport-racingshop.com Share this post Link to post Share on other sites
dirtdog 4 Posted November 3, 2008 when someone gets the chance could you post up dimensions & sizes. mounting points(im guessing front bumper mount to chassis leg, and subframe) i've been thinking about fitting a thin one to my car but need to work out if it will fit with a diffrent engine. cheers Share this post Link to post Share on other sites
rally_kid 0 Posted November 3, 2008 i would also be interested in seeing the dimensions when anyone gets them as im wanting to build a set of guards for the new rally car. cheers Share this post Link to post Share on other sites
SPGTi 2 Posted November 3, 2008 Crawling under the car with cardboard to make templates has always worked for me. Steve Share this post Link to post Share on other sites
bren_1.3 1 Posted November 3, 2008 (edited) hope this works! everything is in centrimetres. bar the rear mounting hole diagram which is in millimetres. the whole thing is made from alloy. dont know the degree's on the bends. (they arent straight bends, more curved) Edited November 3, 2008 by brens_1.9_wide_arch Share this post Link to post Share on other sites
dirtdog 4 Posted November 3, 2008 that's great. thanks Share this post Link to post Share on other sites
Jrod 7 Posted November 4, 2008 I have some alloy tankguards forsale if anyone wants them. Share this post Link to post Share on other sites
