Oil Pressure Dropped Of The Scale!

[eddie bullit 37]

Hi people my pug dash is displaying nil pressure on the oil gauge. Do you reckon its blocked with s*ite? I know they are unreliable but should I replace it or remove and clean. If replacing where's best to get one from and anyone got a part no.?

Cheers in advance

Ed.

[A2TheA 0]

have you checked under the bonnet yet? if theres no pressure first thing id look for is a huge hole

[CosKev 16]

Could just be a bad connection on the sender,or the brown plug under the AFM

 

Pretty sure gen pug sensor is over £50,you can get a Intermotor one for around £30,part number 53800.

 

[craig f90 0]

I had a look on Autofve a while back, i think they were £53 +vat? and P&P.

Ebay may throw one up?

[eddie bullit 37]

Thanks for the replies chaps..def no holes as I blasted back on m66, legally of course, and temp was fine. I'll check connections at weekend, could well be a dodgy connector. If not think I'll have a go at cleaning it petrol or similar dont want to pay 50 sheets for a new one

[rapidcossie 0]

Thanks for the replies chaps..def no holes as I blasted back on m66, legally of course, and temp was fine. I'll check connections at weekend, could well be a dodgy connector. If not think I'll have a go at cleaning it petrol or similar dont want to pay 50 sheets for a new one

 

 

I have a similar problem, the gauge seem to work intermittanlty...

 

 

Does cleaning it with petrol work? or is it a waste of time?

[pug_ham 244 3 Cars]

Any bad connection will be better if you clean it, also give the terminal onthe snder a clean with scotchbrite or wet & dry.

 

Well worth a try before shelling out for the sender.

 

Graham.

[CosKev 16]

I have a similar problem, the gauge seem to work intermittanlty...

Does cleaning it with petrol work? or is it a waste of time?

 

Hi m8,

You bought a 205 now the Saphs gone??????