RAF_gti 0 Posted October 14, 2008 So I was taking my starter motor out today and once I had the rad off I spotted this bracket just to the left of the starter (as you look in at it) No nuts or bolts were present but washer mark was still very clear, I certainly havn't removed it and in the 6000miles I have covered in the car I didn't hear any rattle which I imagine it would make! In the block there are two holes into what I presume they screw into, one has a sheared bolt in it which I'm pretty sure is what I will be drilling out at the weekend.. STeve Share this post Link to post Share on other sites
Veero 1 Posted October 14, 2008 It's just a support bracket for the other end of the starter. It will be fine without it. 9 out of 10 205s I've worked on haven't had them fitted. Share this post Link to post Share on other sites
welshpug 1,666 Posted October 14, 2008 its a support bracket for the original starter motor. Share this post Link to post Share on other sites
RAF_gti 0 Posted October 14, 2008 Excellent, 1Kg saved so extra performance already :glare: Share this post Link to post Share on other sites
