djinuk 2 Posted October 10, 2008 I have some new doors to put on my 205 xs, they have no glass in so i must swap the windows (winders, not electric) onto these doors, and then botl these new doors onto the car. question is how hard is it, anybody fancy giving me a quick guide, is there any rivits or anything, or is it all just unbolt etc.. Share this post Link to post Share on other sites
djinuk 2 Posted October 10, 2008 brilliant , i actually look forward to doing this now. Share this post Link to post Share on other sites
BusEngineer 7 Posted October 10, 2008 As said above it all unbolts, its fairly simple pull the window seals off and the winder mechanism comes out through the top the rest is self explanatory Enjoy Share this post Link to post Share on other sites
Andy F 0 Posted October 10, 2008 only thing that has rivets is the clips for the wiring loom if you have any electrics in your door anyway pretty simple: undo 2 bolts on door check, squeeze in pin on other end of door check with grips and knock out undo 4 bolts of inside of door, door comes off hinges all other mechanisms are just bolted in so just swap them straight over, bit fiddly getting glass back on runner Share this post Link to post Share on other sites
