Rear Caliper Brackets Help

[yorkshirekowboy 19 1 Cars]

just a quick question, i am struggling in trying to bolt the caliper bracket onto my 306 arm. Im using the bolts from a 309 axle for my 306 arm to bolt on my caliper bracket, but they arnt going all the way in. Am i right in thinking that they are the same thread pattern and lengh of these models of car, and they are juts rusted up?

 

also what are the bolt size and thread pitch/pattern.

[welshpug 1,657]

probably just need to clean the threadlock off them and the holes, bolts are the same -

 

 

4228 22 SOCKET SCREW DIAM M8X1.25-20mm

[yorkshirekowboy 19 1 Cars]

probably just need to clean the threadlock off them and the holes, bolts are the same -

 

 

4228 22 SOCKET SCREW DIAM M8X1.25-20mm

 

 

oh thanks, you seem quite good at finding the part number and descriptions, so maybe you could help me again, whats the diameter of bolt and thread pitch and length of the bolts that hold on the dust shields for the beams?

[welshpug 1,657]

they're just standard m6 caphead screws, 16mm long IIRC.

 

replace with SS if you must fit the shield back on.