Sensors /switches Locations On Engine

[skanny 0]

Can anyone point me and im sure many other newbies to a picture / diagram showing the locations of the various sensors in the engine block

 

Temp guage sender

Coolant temperature sensor

oil pressure switch

oil temperature guage sender

 

Is there an oil level light or just the pressure guage?

 

They haynes book of lies is not the clearest when it comes to these sensors / switches.

 

Thanks

Colin

[CosKev 16]

Hi m8

Oil pressure sensor and oil pressure gauge sensor are on the front of block,you can see them in this pic:

 

 

The bigger one is for the gauge,smaller one is for the oil pressure light

 

The oil temp sender is in the back of the sump,near the rear engine mount.

 

Coolant temp switches are screwed into the thermostat housing on the back,look down the back of the engine under dizzy.

 

The coolant temp sender for the ECU is a blue sensor with a blue wire plug onto it,screwed into the water housing that the SAD valve is bolted too.

 

There is no oil level light.

 

[skanny 0]

Hi m8

Oil pressure sensor and oil pressure gauge sensor are on the front of block,you can see them in this pic:

 

 

The bigger one is for the gauge,smaller one is for the oil pressure light

 

The oil temp sender is in the back of the sump,near the rear engine mount.

 

Coolant temp switches are screwed into the thermostat housing on the back,look down the back of the engine under dizzy.

 

The coolant temp sender for the ECU is a blue sensor with a blue wire plug onto it,screwed into the water housing that the SAD valve is bolted too.

 

There is no oil level light.

 

 

Cheers fella,

 

BTW are you the Ex MK indy owner?

Green with the R1 in? built by Steve R?

 

Cheers

Col