206 Gti Seats Into A 205?

[Veero 1]

Now I know the cars are different sizes obviously but I remember a while ago someone modifying a 206 dash to fit the 205...

 

Would the rear seat bench from a 206 be narrow enough to fit in a 205? I guess the fronts would probably go relatively easily with some custom subframes but I have no idea how wide the 206 is inside and there aren't any 206's in scrappies near me that I've seen recently so I can't measure any.

 

The 206 GTi half leather interior seems a bit more hard wearing than the self disintegrating 205 variety and there seem to be a few written off 206 GTis around.

 

Cheers

Veero

[MerlinGTI 3]

I was told GTI 180 front seats fit in a 205, but there will be some sodding about with the subframes methinks (no biggie )

 

I wouldnt of thought the rears would fit, they have rounded edges and would look weird. Thats even if they are wide enough (or to wide.. I think they are narrorow-er actually?). Im pretty sure they mount differently as well.

[Veero 1]

Yeah the fronts would just need a new subframe made up, nothing too bad, I know the rear bench is a bit curvy but the 306 bench is similar to the 205 so wondering if the 206 is aong the same lines, if it is and will vaguely fit I reckon there's a slim chance it will all go.

 

Could someone measure the interior width of a 206 between the rear interior panels?

[cybernck 402 1 Cars]

by the way, 306 rear seats are quite a bit wider and the longer "half"

of the bench would need to be chopped to roughly the other side's

length in order to fit, but otherwise it should be doable.

[steve@cornwall 100]

A neighbour was going to fit 205 R.garros seats in a saxo - width of the rears is VERY close. IIRC the 106 / saxo rear base is slightly wider, not measured but certainly would "squash in " to the 205 without being noticeable. I would think you would need to bolt the 106 base directly through the 205 body, making them non-tiltable. The rear seat backs retaining clips are in totally the wrong position, of course, But the seats are close size- wise, It's just mountings that are totally different.

[Veero 1]

Nik I meant the way the 306 seats mount and tilt looks similar to the 205 but the rear 306 bench is a fair bit wider, it's the 206 seats into the 205 Im interested in.

[steve@cornwall 100]

Nik I meant the way the 306 seats mount and tilt looks similar to the 205 but the rear 306 bench is a fair bit wider, it's the 206 seats into the 205 Im interested in.

 

 

Duh!!! for some reason I was thinking 106 Ignore my stupidity

[Para 82 2 Cars]

That's probably the best looking seats which you can fit into 205

 

 

 

And here are the one from 306

 

Edited September 18, 2008 by Para

[Veero 1]

Which seats those top ones Para?

 

Yeah Im after the whole lot though not just the fronts.