NeilGTi85 5 Posted September 12, 2008 http://cgi.ebay.co.uk/306-GTI-6-HEADTUNE-T...id=p3286.c0.m14 What do you guys think of this? Neil (not for me but a friend was looking at it for his 306) Share this post Link to post Share on other sites
ifcho 0 Posted September 12, 2008 I see that there is still room for improvement :-D Fitted with low-profile, countersunk screws to maximise airflow cutting/milling the other sides of the screws should open a whole new stable full of stallions Share this post Link to post Share on other sites
Veero 1 Posted September 12, 2008 Ah those eBay ads are hilarious. Seem some Mi16 ones going for £70+, ludicrous. Reckon Ill trawl round scrappies get a dremel and make £50 a pop on those. Share this post Link to post Share on other sites
DanteICE 72 Posted September 16, 2008 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=014 Saw that one and just out of interest, called up headtune and asked them how much one of these new would be and the guy said, they never made that one - so he wouldn't know! Your right, veero, get a load on ebay and you could clean up mate! Share this post Link to post Share on other sites
Silver6 0 Posted September 16, 2008 These Guys are ridiculous! The GTi-6 Body is completely standard, bar a bit of polish. I certainly wouldn't buy one, as all it takes is a night in with a dremel/flap-wheeled drill :/ I've done mine and a few others for nowt Share this post Link to post Share on other sites
Veero 1 Posted September 16, 2008 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=014 Saw that one and just out of interest, called up headtune and asked them how much one of these new would be and the guy said, they never made that one - so he wouldn't know! Ironic (or maybe glaringly truthful) that in the eBay ad it says "Headtune, often imitated never bettered" ... Share this post Link to post Share on other sites
taylorspug 7 Posted September 16, 2008 http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...A:IT&ih=014 Saw that one and just out of interest, called up headtune and asked them how much one of these new would be and the guy said, they never made that one - so he wouldn't know! Your right, veero, get a load on ebay and you could clean up mate! Did you tell the Headtune guy about the ebay ad? As someone is obviously trading using his name, which is quite serious... Share this post Link to post Share on other sites
Batfink 201 Posted September 17, 2008 you can have the throttlebody bored out as much as you like but it will do bugger all without a bigger throttleplate. trimming the screws down probably won't do bugger all due to all the imperfections of the standard inlet manifold. money better spent on a good night with some strippers Share this post Link to post Share on other sites
DanteICE 72 Posted September 19, 2008 Did you tell the Headtune guy about the ebay ad? As someone is obviously trading using his name, which is quite serious... He already knew about, didn't seem to care! I think he is only a one man band sort of thing, because if you look at his website it seems pretty home and basic design. Also I think he only ports what he can get hold of because there is not alot of stock available on his website. Share this post Link to post Share on other sites
