nick 3 Posted September 11, 2008 I seem to have a bit of an intermitent problem with the brakes on the mi. It is on std brakes, with new discs and pads, new fluid, and braided hoses. I have the chance of getting the brakes from a 306xsi.... discs, calipers, m/c etc.... what I need to know is will the servo also fit? Thinking I might as well have the whole set-up while I'm at it. I think it's either the master cylinder or servo that is playing up (done the usual test on the servo and it seems ok, but who knows...) Cheers, Nick Share this post Link to post Share on other sites
welshpug 1,657 Posted September 12, 2008 what problems are you experiencing?! I'm not 100% certain, but I wouldn't be surprised if it does fit, though I'm sure theyre bulkier than original 205 ones so may not be such a good idea with a valver. Share this post Link to post Share on other sites
jackherer 543 Posted September 12, 2008 Right hand drive 205 GTIs have a smaller servo than LHD models so there are definitely some space issues. Share this post Link to post Share on other sites
nick 3 Posted September 12, 2008 Ok, cheers lads, I'll have to have a measure up. My fuel filter has been moved so it might not be too tight now. The depth of it shouldn't be too much trouble as there is quite a bit of clearance on the cam cover and M/C. Nick Share this post Link to post Share on other sites
