evojay71 0 Posted September 7, 2008 Yesterday I hit a kerb on a road rally and bent the pin in the rear trailing arm which ended in my retirement Could anyone tell me if the pin out of a 1.6 beam is the same as the 1.9??? Cheers! Share this post Link to post Share on other sites
dirtdog 4 Posted September 7, 2008 (edited) nope.they are diffrent lengths Edit- The 1600 pins are 105.00mm The 1900 pins are 98.00mmStub pins Edited September 7, 2008 by dirtdog Share this post Link to post Share on other sites
welshpug 1,657 Posted September 7, 2008 you can buy them for a lot less from Peugeot Sport France, but your best bet TBH is to pop down a scrappy with a big socket and a copper hammer I was on top of a mountain near me last night watching a road rally! If its a drum stub I may have a spare too Dirtdog, you got that arse backwards! Share this post Link to post Share on other sites
dirtdog 4 Posted September 7, 2008 Dirtdog, you got that arse backwards! oops, too much fizzy pop last night i think thanks Share this post Link to post Share on other sites
jonnie205 1 Posted September 7, 2008 i have a 1.9 one if you still need £20 delivered Share this post Link to post Share on other sites
evojay71 0 Posted September 7, 2008 oops, too much fizzy pop last night i think thanks Done yesterday evening in caerwent millitery base,very narrow and lined with nasty kerbs all the way around and very rare you get away with a mistake as anyone who's done a rally there will know what i'm talking about. I was one of the lucky one's to get away with what I did and limp home, I felt sorry for the boy who ripped the beam clean off his 205 Share this post Link to post Share on other sites
evojay71 0 Posted September 7, 2008 Anyway thanks for all the replys guys,I have a 1.6 breaking and a 1.9 complete so that will save me the hassle of wasting my time trying the 1.6 pin Share this post Link to post Share on other sites
