HERMAN 33 Posted September 3, 2008 My rear beam is kn##ked I know were there is a 1.6 axle if I get it and swop my hubs ect will it be the same as my 1.9. This 1.6 beam as recently been reconed. I am just wondering if the torsional strenght is the same. Cheers Share this post Link to post Share on other sites
Tom Fenton 1,541 Posted September 3, 2008 The beams are the same apart from the stub axles and brakes etc, so you will need to swap the stub axles over as well as the hubs. Other than this it is a reasonably straightforward swap. Share this post Link to post Share on other sites
HERMAN 33 Posted September 3, 2008 Cheers thanks for the advice Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted September 3, 2008 Cheers thanks for the advice Another bit of advice; Any questions or problems, please try a search before starting a topic as most subjects & problems have been covered before but also please have a read through this topic. Graham. Share this post Link to post Share on other sites
