spikey_richie 0 Posted September 2, 2008 I've done a quick search, but couldn't find anything useful... Basically my o/s number plate light is working, and my n/s isn't. I've swapped the bulbs, and the same is true. Does the loom go o/s first, then in parallel to the n/s? Or the other way round? Or are they seperate circuits? Share this post Link to post Share on other sites
Anthony 1,003 Posted September 2, 2008 Almost certainly just corrosion - clean up the contacts for the bulb and wiring connector, and it'll usually be fine. Share this post Link to post Share on other sites
spikey_richie 0 Posted September 2, 2008 Time to get the multimeter out then Cheers Anthony. Share this post Link to post Share on other sites
spikey_richie 0 Posted September 2, 2008 Snorted. Swapped the plugs over, still no show so I got a small flat-head screwdriver and had a little scrape at the connector inside until it worked. Fixed one of the side lights whilst I was at it. Double whamy! Share this post Link to post Share on other sites
