eddie bullit 37 Posted August 14, 2008 When in traffic on a slip road this afternoon, clutch dipped, trundling along, I could hear a clicking sound on every revolution of the wheel coming from the drivetrain. When I got home I got the missus to freewheel the car as I walked along side. It sounded like a crunching noise. I jacked up the front end and on spinning the nearside wheel a light clicking sound can be heard. I'm guessing this is what I can hear when on the move. Any ideas what this could be? At a guess I'd say bearing or hub carrier as I've fitted new cv boots. I just hope its not drive shaft related. Thanks in advance fellas. By the way had a fantastic drive today through North Yorkshire..Settle, Hawes and Kirby Lonsdale can def. recommend as a good way to waste an day. Even the missus telling me to slow down couldn't spoil things Share this post Link to post Share on other sites
Goliath 94 Posted August 14, 2008 Sounds to me like a bearing on its way out. driveshafts tend to knock on corners. Soes anything make it worse? i.e. accelerating or cornering? I think if your left bearing is going then it should be more noisy when you turn right... Share this post Link to post Share on other sites
eddie bullit 37 Posted August 14, 2008 Sounds to me like a bearing on its way out. driveshafts tend to knock on corners. Soes anything make it worse? i.e. accelerating or cornering? I think if your left bearing is going then it should be more noisy when you turn right... I was hoping it was a bearing, I just thought they developed play/lateral movement. I'll try it lock to lock in the morning mate thanks for the reply.. Share this post Link to post Share on other sites
jimistdt 1 Posted August 14, 2008 (edited) This couldn't be something as trivial as a balancing weight catching on the caliper could it? Quote "which will do me as I'm still fiddling with the miami. new discs and pads" Edited August 14, 2008 by jimistdt Share this post Link to post Share on other sites
welshpug 1,657 Posted August 14, 2008 if it has R clips on the end of the driveshaft check its not one of these moving about! Share this post Link to post Share on other sites
eddie bullit 37 Posted August 15, 2008 thanks for the replies chaps. I dont think its balancing weights but I'll check the drive shafts this morning ... Share this post Link to post Share on other sites