tony perks 1 Posted August 10, 2008 As it says in the title really looking to fit my be box onto a Tu engine to change down a couple of classes next yaer any ideas?. Share this post Link to post Share on other sites
bren_1.3 1 Posted August 10, 2008 documented a few times on here. BE4R casing with BE3 internals. sandy's your man, apparanly done a few. Share this post Link to post Share on other sites
Sandy 191 Posted August 10, 2008 Mk1 Picasso 1.6 is the easiest to find, you need the intermediate bearing carrier too, it's unique to the Tube (TU engine BE box ) Share this post Link to post Share on other sites
steve@cornwall 100 Posted August 10, 2008 Don't know if it's of any use, but a neighbour is scrapping a saxo vtr , don't know what ratios it uses, but imagine it would bolt straight on? Share this post Link to post Share on other sites
tony perks 1 Posted August 10, 2008 (edited) Don't know if it's of any use, but a neighbour is scrapping a saxo vtr , don't know what ratios it uses, but imagine it would bolt straight on? Yep sure would fit but i want to use my close ratio be box and tran-x diff with 4.8 CWP!!, Besides the MA BOX IS PANTS. Edited August 10, 2008 by tony perks Share this post Link to post Share on other sites
tony perks 1 Posted August 10, 2008 What do you mean by the intermediate bearing carrier, Sandy, do you mean the jobbie on the back of the engine? Share this post Link to post Share on other sites
Sandy 191 Posted August 11, 2008 That's the one yes. You'll need the linkages and levers off a 205 BE set up to bodge up too, unless you take the entire cable operated set up from a Picasso. Share this post Link to post Share on other sites
tony perks 1 Posted August 11, 2008 Thanks Sandy, I will keep my eyes and ears open for one, there's nothing on thiefbay at the Mo. Share this post Link to post Share on other sites
Guest zeddy Posted August 31, 2008 Sandy, I notice you are in Truro, which is no too far from me. Would you be interested in fitting a TUBE conversion to my XS. I'm finding the MA box is too lightweight for rallying. Cheers Isaac Share this post Link to post Share on other sites
Sandy 191 Posted August 31, 2008 PM'd. Doesn't surprise me! Share this post Link to post Share on other sites
tony perks 1 Posted October 3, 2008 have now found 3 boxes from a breaker in liverpool £100 each all on a pallet for £45 delivery, now just got to sort a decent tu to go into the car. Share this post Link to post Share on other sites
Sandy 191 Posted October 3, 2008 Bingo, that's quite cheap for them lately. (Don't tell him!) Share this post Link to post Share on other sites
