205johnnyxsi 0 Posted August 5, 2008 Hello I am at my mates and we have just taken a engine out of His Car the engine is 2.0 xsi from a 306 16v. The Engine Is out, Gearbox has no bolts connected But it seams the input shaft is holding the gearbox on We can get movement on the box rocking it ect ect The Engine is serposed to be going in our 205 project this week If any one has come across with stubbon gearboxs let us no Just after a easier way of taking the box off the engine Thanks Johnny Share this post Link to post Share on other sites
welshpug 1,657 Posted August 5, 2008 pull the pin out that secures the clutch arm to the shaft, the box should pull off then. Share this post Link to post Share on other sites
205johnnyxsi 0 Posted August 5, 2008 Is there a Easy way , We tried that last night but no joy... what tools best to use on it it will only pull out ? Share this post Link to post Share on other sites
205johnnyxsi 0 Posted August 5, 2008 or do i just have to give it some force till the pin comes Share this post Link to post Share on other sites
jonnie205 1 Posted August 5, 2008 pin can seize and become impossible to remove, either wld to pin and pull out or bend clucth arm up Share this post Link to post Share on other sites
welshpug 1,657 Posted August 5, 2008 there are 2 types IIRC, one will have a spring over the end of it, that type simply pushes in. the other type screws in. Share this post Link to post Share on other sites
205johnnyxsi 0 Posted August 5, 2008 Thanks Lads Box is Removed from a little bit of bending Has anyone placed a 406 sri turbo in a 306 before 2 Projects this week Thanks Johnny Share this post Link to post Share on other sites
