Coolant System Bung?

[James_R 3]

I’m after somewhere that sells bungs for coolant systems, basically I’m removing the heater and some other bits of the coolant system and need a bung to block off the redundant oulet/inlets, I know the s16 had one on the back of the block and zx diesel airboxes have said bung, but does any one know the part number for either of them, so I can order one??

 

Thanks

 

James

[Alastairh 47]

Pm me your address mate, and i'll bung *Di dum tish* one in the post tomorrow. Have a couple spare from my last scrap yard raid

[James_R 3]

Sweet pm sent

[M@tt 77]

Al would one of these fit into the top right pipe coming off a ph1 1 style expansion tank? if so any chance of a spare one heading my way? i'll send you some dosh for it

[Alastairh 47]

Should do mate. I will have a rummage later and see how many i've got

[James_R 3]

Al would one of these fit into the top right pipe coming off a ph1 1 style expansion tank? if so any chance of a spare one heading my way? i'll send you some dosh for it

 

Rover 200 header tank only has the one oulet on it the top, and fit the 205 well, bit of a better OE look than bungs just a thought.

[Alan_M 66 1 Cars]

I gather this is for the heated windscreen?

 

What you done for the distribution block at the back/bottom of the block then? Or is this what you need the bung for?

 

Oi, Alistair you got anymore? I need about 3

[pug_ham 244 3 Cars]

does any one know the part number for either of them, so I can order one??

 

Thanks

 

James

For future reference I think the part number is 1307 W4 but there is also a very similar rubber bung ont the back of the inlet manifold on the diesel Xu's & thats part number 1210 03.

 

Graham.

[Henry Yorke 269 3 Cars]

Just do what M@tt does.... a bit of wood dowel and a jubilee clip!!! It sizzles under pressure and smells of pine!!! lol!