Para 82 2 Cars Posted July 24, 2008 Hi there I have 1.6 GTI from 1991 fitted with S16 engine from 1994. I have NO power steering and I wonder what parts do I need to make a conversion. I was looking on the forum but there is nothing precise. I will appreciate if somebody will make a list of things so I can start collection. Thanks Mike Share this post Link to post Share on other sites
James_R 3 Posted July 24, 2008 205 Power steering rack and lower UJ to column s16 non-AC engine bracket, alt/pas pump bracket pas pump and alt, pipe form pump to rack. either Non-AC Alt, PAS pump, brakcet and pipe to steering rack from the later 2L 306's XSi's etc.. Resovoir from the 205 set up. then pipe work to link it all, the remainder is low pressure so push and circlip fits. The s16 PAs pump has a bigger wheel on it, so in theory works better at low rev's and the later set ups use a smaller pas pump pulley, can't say I've noticed much difference in steering weight between the two types on 306s. Share this post Link to post Share on other sites
Para 82 2 Cars Posted July 24, 2008 I will need this one ? http://cgi.ebay.co.uk/ws/eBayISAPI.dll?Vie...;Category=10406 Share this post Link to post Share on other sites
Miles 331 1 Cars Posted July 24, 2008 You need all S16/XSi parts for this, the only 205 part is the rack and U/J Share this post Link to post Share on other sites
Para 82 2 Cars Posted July 24, 2008 Sorry for being lame, I need this one ? http://cgi.ebay.co.uk/PEUGEOT-306-XSI-gti-...p3286.m20.l1116 Share this post Link to post Share on other sites
Miles 331 1 Cars Posted July 24, 2008 Thats the one, Worth asking if they have the pipe's and Resovoir from the 306 as well Share this post Link to post Share on other sites
ifcho 0 Posted July 24, 2008 (edited) Someone here once said that you could use a power steering rack from 306? Has anyone tried? Does it need much modification? and what's the ration of a 306 rack? Edited July 24, 2008 by ifcho Share this post Link to post Share on other sites
