mafo 0 Posted July 14, 2008 (edited) As above having a roll cage installed here in sweden, to me this does not look right! Took some photos of my cage progress. Need some input from you guys asap, before he tig welds it this week!! That main frame does not seem to match the a-frame lines - the curve looks to high. Edited July 14, 2008 by mafo Share this post Link to post Share on other sites
Tom Fenton 1,541 Posted July 15, 2008 Looks fine to me. Share this post Link to post Share on other sites
maxirallye 2 Posted July 15, 2008 The bend in the main hoop does look high, it would normally be in line with the bottom of the rear window. Tony. Share this post Link to post Share on other sites
Kev-G 1 Posted July 15, 2008 Main hoop could maybe have been bent twice for a better line with the pillar and less severe bends, but it looks tight to the body which is what you want. Share this post Link to post Share on other sites
Baz 421 Posted July 15, 2008 Yep, tight to the body, although that one tight bend may be weaker than 2 gradual ones, never the less, looks fine. Share this post Link to post Share on other sites
daza4 24 Posted July 15, 2008 Looks good are you adding Harness bars aswell??? good idea if not. Share this post Link to post Share on other sites
mafo 0 Posted July 15, 2008 Thanks for your replies, Yes will be having harness bar aswell as many other custom stuff here and there. The guy who is building this has competition car building history STCC(Swedish touring car champs) he has one of the old touring cars sitting in his garage. Share this post Link to post Share on other sites
daza4 24 Posted July 16, 2008 Thanks for your replies, Yes will be having harness bar aswell as many other custom stuff here and there. The guy who is building this has competition car building history STCC(Swedish touring car champs) he has one of the old touring cars sitting in his garage. Just wanted to make sure Share this post Link to post Share on other sites
