davemar 16 Posted July 11, 2008 Driving home yesterday I had a drop of power and rough running. Pulled over to find the screws that hold the vacuum advance unit onto the side of the distributor had fallen out, so it was hanging rather sadly there, knocking the timing out. Unfortunately I haven't got any spare screws (they didn't drop on to the top of gearbox it seems), but am not sure of the sizes. Does anyone know the size of the screws? It's a Bosch distributor, so I imagine the screws are all the same size for this. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted July 11, 2008 I can't find them on service box but just removed one from a dizzy I've got here & they are M4 x 6mm long afaik. Graham. Share this post Link to post Share on other sites
davemar 16 Posted July 11, 2008 I can't find them on service box but just removed one from a dizzy I've got here & they are M4 x 6mm long afaik. Graham. Thanks for that, I'll try and rummage around to find some. Share this post Link to post Share on other sites
