dcc 855 Posted July 9, 2008 hey i cannot remember the name of the sealant i need to seal my sump back onto my engine block! Its high grade, and in a tube which needs a 'gun' to push it out... kinda liek this http://www.geocel.co.uk/dynimages/43.png many thanks, and also sorry if not in the right section... Share this post Link to post Share on other sites
ifcho 0 Posted July 9, 2008 I thought you can use any high temp oil resistant silicon sealant :-) Or a gasket.. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted July 9, 2008 Wurth? Thats the name of the stuff Miles always mentions iirc. Graham. Share this post Link to post Share on other sites
welshpug 1,657 Posted July 9, 2008 yes Wurth if you can get it, Loctite or Elring are good too. technique and preparation is the most important thing to remember though, cleanliness and patience, and not over-tightening the bolts. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted July 9, 2008 Just normal Wurth RTV, Has always done well for me so far Share this post Link to post Share on other sites
