ifcho 0 Posted July 4, 2008 Hello, Does anybody now the setting for these bolts? I just tightened them with the air gun, but I think they might need to be torqued properly also do they need thread lock? The original bolts do not seem to have any traces from thread lock. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted July 4, 2008 Crownwheel securing bolts; 48lbft & I usually use some tthread lock onthem when refitting them. Graham. Share this post Link to post Share on other sites
ifcho 0 Posted July 4, 2008 (edited) Thanks :-) I'm going to re-do them, just to be sure any chance you know the setting for the bolts on the diff cover? Edited July 4, 2008 by ifcho Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted July 4, 2008 Its in the Haynes manual under the transmission section. Final drive housing bolts 10mm; 65Nm 30lbft. Final drive housing bolts 7mm; 12Nm 9lbft Graham. Share this post Link to post Share on other sites
