Translation Of Servicebox Description

[c_r_thomson 0]

Looking to replace some bolts/nuts on the car. Can anyone here explain to me how to get the M size (M6. M8 bolt etc) from this description?

 

6923 96 Capscrew - 10x150-50

3622 30 Self locking nut 10x150-12,6-16

 

I doubt 150 is length in mm as it's the nut and bolt to hold on the ball joint from the lower sus arm to the hub.

 

Cheers, Craig

[welshpug 1,657]

10 X 150 - 50, means M10 with a 1.50 thread and 50mm Long.

 

the nut is similar, 10x150-12,6-16 translates to M10 1.50 thread 12.6mm deep 16mm head, self locking nut would mean a Nyloc in this case,

 

These particular bolts will also be grade 8.8 High tensile steel and zinc passivated, with a shank

Edited July 1, 2008 by welshpug

[c_r_thomson 0]

Once again Welshpug.... Thank you

[Para 82 2 Cars]

Can anyone could help to translate this screw:

 

0250 39

 

 

I need them and they don't have them anymore in stock

Edited July 2, 2008 by Para

[welshpug 1,657]

is that the bolt for the coilpack/plug cover on a 405 2.0 Mi16/306 S16/ 405 T16?

 

0250 39

 

SCREW WITH BASE

6X1,00-25

 

M6 x 1.0 - 25mm long

 

not listed as NFP, you should be able to place and order for the dealer to get them from the factory, if you have no luck you could just use some SS capscrews.

Edited July 2, 2008 by welshpug

[Para 82 2 Cars]

Thanks welshpug , I've placed an order for few different screws and this one is the only one which they don't have it. I will be there tomorrow to collect them so I will check what's the story.