chrisj21 2 Posted June 20, 2008 Can someone please confirm the clutch kit i need from gsf is code t18914 1990 1.9 (be3 gearbox i think reverse below 5th) does the kit include release bearing? thanks Share this post Link to post Share on other sites
welshpug 1,657 Posted June 20, 2008 (edited) not sure how you came across that code, it doesnt exist in the catalogue!!! the one for a BE3 205 gti is N18920, £63.90 and yes that does include the release bearing, good idea to change a few other parts while youre there too. Edited June 20, 2008 by welshpug Share this post Link to post Share on other sites
luggy 13 Posted June 20, 2008 good idea to change a few other parts while youre there too. Change the crankseal and get the flywheel skimmed. Share this post Link to post Share on other sites
jackherer 543 Posted June 20, 2008 Can someone please confirm the clutch kit i need from gsf is code t18914 The t is wrong, GSF pug stuff is prefixed N, but even when you correct that you get: N18914 CLUTCH KIT-VALEO 205 PET >87 EXCL GTi; Which is wrong. Share this post Link to post Share on other sites
chrisj21 2 Posted June 20, 2008 Weird as im looking at the catalogue now and on page 130, under peugeot clutch kits, 205 gti 89-94 T18914 £69.50 ?? so which do i need and what other bits when changing the clutch/release bearing? thanks and apologies if im being thick Share this post Link to post Share on other sites
chrisj21 2 Posted June 20, 2008 is it because its the 06 catalogue? Share this post Link to post Share on other sites
welshpug 1,657 Posted June 20, 2008 possible!! it'll be the code I posted up there /\ keep hold of the 06 catalogue though, there's some stuff in there still useful to remember! Share this post Link to post Share on other sites
chrisj21 2 Posted June 20, 2008 I dont have the 06 one its just the one i downloaded today from there site. never mind. thanks for the info. Share this post Link to post Share on other sites
chrisj21 2 Posted June 20, 2008 Found it now. teach me for looking in the wrong place. thanks all Share this post Link to post Share on other sites
gtimon 0 Posted June 21, 2008 One thing you'll have be certain of, is the release bearing. The kit for a fork type clutch is different to a pivot lever type. Be sure you specify, As I had to recently. Share this post Link to post Share on other sites
lagonda 42 Posted June 22, 2008 Bought a lot of parts for my CTi from GSF over the years, & the initial letter refers to the make of car. From memory, N is Peugeot & T is Citroen (don't have catalogue with me here). If you look carefully, you'll see same parts for some Citroens have the same number, only the prefix letter is different ... this is because the part itself is common to both cars. Some care is needed as the part they sell might be correct for one car more so than another. For example I bought a lower mount from GSF which was actually more correct for various Citroens ... but that said the general concensus was that the Citroen spec was considered an improvement for our cars anyway! Share this post Link to post Share on other sites