Crazy-legs! 0 Posted May 28, 2008 I was just wondering if anyone could tell me weather ARP make a con-rod/big-end bolt to fit my XU10J2TE (RGX) 2.0L turbo engine. Ive looked through their catalogue, and all they list is for the 205/306. Seeing as a 306 runs a iron block engine, will these be compatible with mine? Any advise would be much appreciated. Ive done a seach and coudnt find anything! Cheers, Marc. Share this post Link to post Share on other sites
Anthony 1,003 Posted May 28, 2008 I'm pretty sure the 205/306 ones will be fine. Remember to check and modify the chamfer as required! Share this post Link to post Share on other sites
Crazy-legs! 0 Posted May 28, 2008 Cheer Anthony, i just wanted to make sure that the length and diameter of the bolts were the same before i order them. P.S. Your Avatar RULES! Marc. Share this post Link to post Share on other sites
whizzer71 0 Posted May 29, 2008 Hey Marc hows that engine of yours coming on fella ?,Im going to start building my bottom end soon just the oil pump left to get Share this post Link to post Share on other sites
Crazy-legs! 0 Posted June 2, 2008 (edited) Ive only just finnished building a 3SGTE for my mates GT4. So at last, i can start building a proper engine again! Lol I'm still trying 2 source a decent DKZ cam for her. But im wondering if there would be much benifit, if any in buying a Catcam over the DKZ one? If any one could find some info on lift and duration that would be great. Im sure iv'e seen it on here somewhere, but i cant find it! Cheers, Marc. Edited June 2, 2008 by Crazy-legs! Share this post Link to post Share on other sites
