Another Boring Oil Pump Question

[marksorrento205 80]

After spending half of my night shift tonight searching for the answer to my question, I have had no joy. So here goes. Does anyone know the limits of a MI16 engine oil pump (XU94J) rotors. I have looked at the rotors and cant see any wear. I have also measured between the teeth of the rotors and found a 0.014" gap. Personally I think this will be ok but as its apart would like to have a cast iron figure to check against. The good old haynes manual has the good old take it apart, look at it and put it back together script thats no help. Any help would be ok.

 

Cheers

 

Mark

[Ryan 99]

Check the clearance between the teeth and the pump body. It should be 0.064mm (0.025") max.

[marksorrento205 80]

Nice one will do