kyepan 291 Posted May 17, 2008 Looking at a set of superleggeras at the moment, they are 15" but ford offset, is it ok to use hubcentric spacers? and if so how much are they? J Share this post Link to post Share on other sites
Jrod 7 Posted May 17, 2008 Hubcentric spacers are fine. Share this post Link to post Share on other sites
brianthemagical 1 Posted May 17, 2008 Nowt wrong with the principle, it's only a problem when not fitted thoughtfully or geometry isn't considered. Share this post Link to post Share on other sites
tom_m 0 Posted May 18, 2008 hubcentric spacers in this case are fine because they are just returning the wheel to the correct pug offset. you won't be adding any extra load to the bearing because you're not affecting the existing suspension geometry. spacing beyond the designed geometry is when you start putting extra load on the bearings and change the suspension geometry. possibly causing undesired handling issues Share this post Link to post Share on other sites
