Turbloide2 0 Posted May 10, 2008 Hi all bin getting my engine ready to drop out. Where am i best putting my engine hoist straps to lower the engine out ? Cant seam to find no lifting eyes....... I have removed my carbs and the exhaust manifold has also been removed. Thanks Share this post Link to post Share on other sites
philfingers 5 Posted May 10, 2008 Hi all bin getting my engine ready to drop out. Where am i best putting my engine hoist straps to lower the engine out ? Cant seam to find no lifting eyes....... I have removed my carbs and the exhaust manifold has also been removed. Thanks one around the engine mount on the LHS and normally there#s a lifting ring on the RHS near the dizzy I think Share this post Link to post Share on other sites
Turbloide2 0 Posted May 10, 2008 yep there is two bolts holes near the dizzy so looks like im missing it..... Also how do i remove the speedo drive from the gear box ive pulled the rubber insert out and can pull the cable out about half inch but thats it, do i need to loosn the bolt on at the bottom of it ? Thanks Share this post Link to post Share on other sites
philfingers 5 Posted May 10, 2008 should just be a case of pulling it out once you have removed the rubber bung thing. Share this post Link to post Share on other sites
