Nathan_marriott 0 Posted May 7, 2008 Hello Does anyone have for sale or have the drawings of the bells (so can get some made up) for alcon 4 pot brakes for a peugeot 205 Gti please?? needing some asap Share this post Link to post Share on other sites
swordfish210 20 Posted May 8, 2008 I'v just finished some drawings for some Compbrake discs. I'm making the bells as a college project. Share this post Link to post Share on other sites
Nathan_marriott 0 Posted May 8, 2008 Any change of a copy of the drawings please?? my mate who who owns an engineering firm ready and primed to make them is all ready, just either needs one to copy or the drawings................... Share this post Link to post Share on other sites
swordfish210 20 Posted May 8, 2008 i'm trying to copy the link to Solidworks, where i desinged them but it's not letting me so i'll have to take some pics and send them to you that way. BTW i can't guarentee that they will fit on your discs, or Peugeot hubs for that matter I hope they will give you a good idea though Share this post Link to post Share on other sites
205wrc 16 Posted May 9, 2008 Check this out http://www.205cup.com/forum/viewtopic.php?t=4095 Share this post Link to post Share on other sites
swordfish210 20 Posted May 10, 2008 i hope these help in some way: Share this post Link to post Share on other sites
philfingers 5 Posted May 10, 2008 (edited) Nathan I have a pair of bells, with one new disc. The PCD is completely different to any compbrake item. Very difficult to get hold of discs. I've not much idea what they're worth but open to offers. Rare as rocking horse poo these days too! Pics here http://s188.photobucket.com/albums/z143/oi...0Sale/?start=20 at the start and end of the folder Phil The bells are one red and one blue. Not sure if they're ex works ones Edited May 10, 2008 by philfingers Share this post Link to post Share on other sites
Nathan_marriott 0 Posted November 11, 2008 (edited) I bought them off you on Ebay eventually, they are Ex Works as ive had a mate of mine who looked after meny ex works cars look at them, the discs ive not had the need to replace yet, as ive just been too busy to work on the car of late, but soon as they are on ill let you know!!! Had to have a fbit of a fettle as the pads had "chattered away the calliper but all sorted now Edited November 12, 2008 by cybernck Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted November 12, 2008 so... who of you can make some custom bells for me and how much would it all cost? Share this post Link to post Share on other sites
Guest rs-tone Posted November 12, 2008 Cost depends on amount of drawing and programming time required in the first instance and then the amount of material billet needed to make them. Then it can increase with annodising spec required etc . Its impossible to price just adhoc like that. Share this post Link to post Share on other sites
Powers 13 Posted November 13, 2008 http://www.bgdevelopments.co.uk/info/bells_brackets.htm £80 plus VAT each. Any size. Share this post Link to post Share on other sites
Rippthrough 98 Posted November 13, 2008 If someone wants to draw them up I can definately beat that price for you all^^ Share this post Link to post Share on other sites
Powers 13 Posted November 13, 2008 Even for floating rotors? Share this post Link to post Share on other sites
benlilly 0 Posted November 13, 2008 i'm trying to copy the link to Solidworks, where i desinged them but it's not letting me so i'll have to take some pics and send them to you that way. BTW i can't guarentee that they will fit on your discs, or Peugeot hubs for that matter I hope they will give you a good idea though If you use 'save as' to save the drawing as a PDF you can easily post it on here. Share this post Link to post Share on other sites
Guest rs-tone Posted November 17, 2008 Even for floating rotors? Makes no difference to the bell if its being done from scratch. Share this post Link to post Share on other sites
