Mocal 16 Row Oil Cooler

[Stu 18]

As above, does any one have the dimensions of a 16 row mocal oil cooler handy? Ive got the height at 124mm, depth at 50mm, but according to the mocal site the 235 cooler (i thought this was the total width?) measures 330mm across, is that right? if so thats massive!

 

I wanted to put it underneath the drivers headlight, i know a few people on here have done it, can someone confirm the dims for me?

[engine killer 6]

http://rides.webshots.com/album/540826659KIprQO

 

how about in front of the original fan cowling? there is enough room for your 16 row cooler.

[tom_m 0]

Garry's got a 19x235 one under the drivers headlight Clicky

 

In this thread

[engine killer 6]

Garry's got a 19x235 one under the drivers headlight Clicky

 

In this thread

 

 

seems like some proper ducting from the spot light housing can benefit a good cooling effect too.

[Stu 18]

Yeah Garry's thread is what inspired me really..

 

WOnder if he's got the dimensions of the cooler to hand..

[Garry 1]

Here you go

 

Ebay link

 

Ignore your PM Stu, i got the dims wrong, they are:

 

Dimensions are 285mm x 145mm x 50mm.

 

330mm wide including the brackets.

 

£46 + delivery.

 

On a side note, I am running a sandwich plate with a built in stat and a separate oil stat.

I found that during normal road use the oil would be over cooled because the sandwich plate stat would always stay a little bit open. To solve this (hopefully!) I have a second standalone stat fitted to stop the flow form the sandwich plate before iot gets to the cooler.

Edited May 2, 2008 by Garry

[Stu 18]

Top man! Many thanks bud, dont suppose youve got any more pics of it in situ have you?