Engine Been Sat,cam Belt Change?

[ANDYMISIXTEEN 0]

I have a Mi16 which im putting in my Cti.Im not sure how long it has been built/sitting but it could be 5years ish. Will the Cam Belt need changing? Also while im here do i need to use an original Puegeot oil filter?

[boombang 2]

After that length of time, you often find the tension of the cambelt will cause issues with water pump, especially if it's been on a touch tight. For peace of mind I'd do water pump, tensioner and cambelt.

 

Yes the Purflex Pug spec oil filters are good with a decent non-return valve unlike some aftermarket crap out there, and very cheap from places like Neat Autos (£2.40 last time I bought, but did buy 10 in one hit)

[ANDYMISIXTEEN 0]

It has run at numerous times but only for a few seconds and ive turned it over regulaly while ive had it. It hasnt been drivin though. Will i still need to change the belt and water pump? Wanna get it in asap as im car less now

[boombang 2]

It's easy enough when it's out of the car and doesn't exactly cost a lot. IMHO it's worth it.

[Rom 0]

Personally, for the price..id change it, for piece of mind if nothing else.

There not the nicest to try and do in the car

 

Belts have service intervals..in years or miles. Just because it hasnt done any mileage doesnt mean the belt wont be weaker with age.

Its probably about £100 to change it all...or £xxx if it gives out

[ANDYMISIXTEEN 0]

Im not sure what kit i need, i have a 1.9 Mi16 but i dont know what age or car it came out of.

 

Once i know ill get it ordered;)

 

http://www.pugspares.co.uk/PartsSearchResu...+and+Tensioners

 

http://www.pugspares.co.uk/PartsSearchResu...s&offset=25

 

http://i53.photobucket.com/albums/g56/DJMISFIT1/gsfbelts.jpg

[ANDYMISIXTEEN 0]

From Pugspares...

 

124 81640 405 1.9 16V MI16 88-92 Cam Belt Cam Belt - 133 Teeth £20.56

 

 

8359 0 405 1.9 Mi16 All Cam Belt Tensioner Set Cam Belt Tensioner Set £62.17

 

Is that correct?

 

 

 

 

 

There is also

 

8913 82920 405 1.9 Mi 16V 0 Timing Belt Tensioner Cam Belt Tensioner. £42.30

 

Do i need this one?

[welshpug 1,657]

Peugeot/Citroen part number for the tensioner is 0829 20 £37.30 ea (both the same)

 

Timing belt is indeed 133 teeth, Peugeot part number 0816 40 (Peugeot want £29 24 for the belt )

 

 

GSF part numbers are N13170 (£26.50) for the tensioner (you'll need to order 2) and N13121 (£11.45) for the belt, though I'm sure they do it in a Kit.

 

dont get it from Pugspares, they buy their stuff from GSF and as you can see from the prices I quote, they're bumping the price up a fair amount!!

Edited April 30, 2008 by welshpug

[ANDYMISIXTEEN 0]

I thought they would be sold in kits, everywhere local i rang today didnt have a clue. One place said dont bother about tensioner lol

Is there only one tensioner i need?

[ANDYMISIXTEEN 0]

Gsf is £75.73 inc Vat for 2 tensioners and the belt. £101.46 with the water pump to and free postage.

Edited April 30, 2008 by ANDYMISIXTEEN

[welshpug 1,657]

yup, not cheap engines to get service stuff for, but not the most expensive either.

[ANDYMISIXTEEN 0]

What the sensor in the sump? Mines broken so i may as well order that 2.

[welshpug 1,657]

oil temperature