pug309twin40s 1 Posted April 25, 2008 been helping matt(mat1227) with his mi16 conversion and come to a problem. now ive done a couple of mi conversions with no problems but this has got my stuck. i cant look at the car anytime as matts car is down in worthing. now last sunday i went down and we got everything together all wiring plugged in, starter works fine, we can get fuel working but i just cant get any spark. now the following wires in the pic below im not sure where they plug in, http://homepage.ntlworld.com/pug309twin40s/mi16%20wiring.jpg im sure the little green/yellow wire is an earth wire but its attached to the black wire with a blue wire on the side of it? anyone know where they should all plug in? oh its a 2row 1.9 mi16 loom and engine from a 405 4x4 mi16. Share this post Link to post Share on other sites
pug309twin40s 1 Posted April 25, 2008 Rev counter. which one to the rev counter? or all of them? Share this post Link to post Share on other sites
welshpug 1,657 Posted April 25, 2008 (edited) wire 112? fat blue one, brown wire from it is the shielding IIRC. Edited April 25, 2008 by welshpug Share this post Link to post Share on other sites
Anthony 1,003 Posted April 25, 2008 which one to the rev counter? or all of them? Blue one is the rev counter wire (connects to grey #112 on 205 loom), and the black and yellow/green should be earthed. Share this post Link to post Share on other sites
pug309twin40s 1 Posted April 25, 2008 ok so black with with green/yellow wire attached goes to rev counter, what about the little blue wire??and would these wires cause no spark??ok cheers anthony.now would these cause wires cause no spark? Share this post Link to post Share on other sites
welshpug 1,657 Posted April 25, 2008 (edited) other way round like Anthony said, small blue to rev counter, other two earthed Edited April 25, 2008 by welshpug Share this post Link to post Share on other sites
