mafo 0 Posted April 24, 2008 Has anyone got a picture of this kit or a car using it? I spoke to Skip Brown cars to get a bit more info, turns out that it adds an extra 9mm width to each side. Share this post Link to post Share on other sites
dean 0 Posted April 24, 2008 hi i have this kit and you carnt really that it sticks out more than standard Share this post Link to post Share on other sites
mafo 0 Posted April 24, 2008 Are you able to post a picture so i can see how much neg camber? Share this post Link to post Share on other sites
welshpug 1,657 Posted April 24, 2008 GerLewisLewis's SBC 205 has these, doesnt look noticaby wider, due to the top of the wheels sitting in a touch compared to a 309 beam. Share this post Link to post Share on other sites
gerlewislewis 0 Posted April 24, 2008 yeah I have this, if you need a specific picture I can take one tomorrow - just tell me what angle and what your looking for exactly and I will try to capture it. PM me your mobile no. and I will send it through as a media message Share this post Link to post Share on other sites
mafo 0 Posted April 25, 2008 yeah I have this, if you need a specific picture I can take one tomorrow - just tell me what angle and what your looking for exactly and I will try to capture it.PM me your mobile no. and I will send it through as a media message Sounds good, the only problem is that my uk company sent me a blackberry and i dont seem to be able to recioeve mms on it via my swedish network. If you can arrange some other way can you take a picture of either wheel from the back looking forward showing the wheel arch and angle of the camber and then from the back of the car showing both wheels - and then also let me know what wheels you have. Many thanks. Share this post Link to post Share on other sites
Super Josh 4 Posted April 25, 2008 Look here to see how far the wheel sticks out on my car Josh Share this post Link to post Share on other sites
gerlewislewis 0 Posted April 25, 2008 i can do this, but will have to wait till monday to post the pics as my laptop at home does not have bluetooth. Share this post Link to post Share on other sites
jackherer 543 Posted April 25, 2008 Has anyone fitted a neg camber kit to a 309 beam on a 205? Share this post Link to post Share on other sites
mafo 0 Posted April 25, 2008 Cheers josh, I am using pts sl434 wheels with toyo 888's 195/50 15 so i think this kit will be perfect! Share this post Link to post Share on other sites
Super Josh 4 Posted April 26, 2008 Cheers josh, I am using pts sl434 wheels with toyo 888's 195/50 15 so i think this kit will be perfect! No problem I think I'm running 195/50 x 15 Eagle F1s in that picture. I reckon it makes the wheels fill the arches nicely with the extra width too. Josh Share this post Link to post Share on other sites
Spiky 37 Posted May 4, 2008 whats the price of the kit? and what does it consist of?? Share this post Link to post Share on other sites
markw 1 Posted May 5, 2008 i think the kit is £200 plus vat and it consists of 2x 405 stub axle pins machined to fit a 205 arm also machined with a slight crank/kink in it 2 ali spacer plates that bolt to the arms were the caliper bracket bolts on, basically a 10mm thick rectangular piece of ali with a big hole in the middle for the stub axle pin and 4 holes in each of the corners for bolting to the arm 4 longer cap head bolts for bolting to the arm thats about it i think it was about 3 years ago when i bought mine whats the price of the kit? and what does it consist of?? Share this post Link to post Share on other sites
