Guest tim_1.9 Posted April 24, 2008 Irritatingly my washer jets (front & rear) are intermittant. The MoT is coming up and I don't want to fail on something silly like this. The washer jets are all new, the washer motors have been checked and even swapped with a spare and I can't find the issue. Pretty sure that it's not the usual corrosion on the spade connectors. When they work they are fine, but front and rear will stop together. Everything else on the stalk works fine. I am not too hot with wiring diagrammes or multimeters, does anyone have any idea which bits of wiring I should wiggle? Thanks Tim Share this post Link to post Share on other sites
boombang 2 Posted April 24, 2008 usually turns out to be the stalk in my experience. Share this post Link to post Share on other sites
nick 3 Posted April 24, 2008 Agreed, usually the stalk. I'll bet the front ones work if you pull the stalk back and wiggle it about. Nick Share this post Link to post Share on other sites
