Phase 1 And 2 Door Card Question

[smokey 0]

Hiya guys

 

I've just got my new door cards which match the new grey carpet i'm putting in my Phase 1 CTI.

 

The carpet is from a GTI but with a heat gun and the use of those plastic foot well bits from a GTI it will fit pretty well.

 

Now the door cards i've got are phase 1.5/2 so it has the extra bit at the top covering the top of the doors. This then obviously makes the red line not match up with the rear door cards.

 

I was wondering on Phase 2 CTI's were the rear door cards made differently so that the red lines matched. Or did they never use the door card which covers the whole of the door?

 

I have 3 options:

 

1, Dye the red lines on both door cards grey, so that they are not noticeable.

2, Remove the grey carpet from my phase 2 cards and put it on my phase 1 cards

3, Not bother at all...lol

 

Hope you can help

[smokey 0]

Or another option it to un-staple the plastic from the top of the phase 2 card and cut off the excess then re staple it, to maintain the same edge.

 

I do like the way these cards cover all of the door though.

 

So if anyone can shed any light on the phase 2 rear door cards for the CTI that would be great.

 

Thanks

[Phil H 16]

The CTI always kept the phase 1 style of doorcard by showing the tops of the doors, even on L reg versions.

[smokey 0]

The CTI always kept the phase 1 style of doorcard by showing the tops of the doors, even on L reg versions.

 

Cool thanks for that.

 

Looks like i might be trimming the extra off so they look like phase 1 door cards.