porter_bmx 0 Posted April 13, 2008 hi can any one tell me where i can get a manifold for carbs to fit a mi16 head??? i have a home made one, but its pretty long and is fouling on the bonnet. all linkages are under the carbs. thanks Share this post Link to post Share on other sites
boldy205 75 Posted April 13, 2008 Most Pug tuners will sell them, Skip Brown, Shenpar (Both very helpfull), Hi flow Etc. Or failing that good old Ebay! There is another company, somewhere abroad that were very cheep, not sure if anyone else knows who i mean??! Share this post Link to post Share on other sites
Miles 331 1 Cars Posted April 13, 2008 The only ones to use are the Jenvy one's, All the other's need work to make them fit and for the small saving made on them this will go out the window as soon as you start, some I;ve seen are a good 5mm out and the casting is just horrid I can supply these at a pretty good price Share this post Link to post Share on other sites
porter_bmx 0 Posted April 14, 2008 The only ones to use are the Jenvy one's, All the other's need work to make them fit and for the small saving made on them this will go out the window as soon as you start, some I;ve seen are a good 5mm out and the casting is just horridI can supply these at a pretty good price sounds good, how much?? will the carbs then clear the bonnet??? engines in at correct angel Share this post Link to post Share on other sites
Miles 331 1 Cars Posted April 14, 2008 Not having anything to do with Carb's I couldn't say for sure, But if your running the linkage under them I cannot see why not, Price for these manifolds is around £190.00 Share this post Link to post Share on other sites
woodsy 0 Posted April 14, 2008 I have got a jenvey manifold on my mi with carbs and use top cable mounting although i use an auto bonnet though. Share this post Link to post Share on other sites
porter_bmx 0 Posted April 14, 2008 thanks, miles could you get me a total price on the manifold and ill order one. just placed a order for the pulley i needed on through ebay. cheers steve Share this post Link to post Share on other sites
Daz_C 8 1 Cars Posted April 14, 2008 will the carbs then clear the bonnet??? engines in at correct angel Should do with abit of room to spare. I've got my linkage underneath too. Share this post Link to post Share on other sites
MiamiGus 0 Posted April 18, 2008 I'm glad i'm using an auto bonnet as I dont think my Dellortos would clear, I'm aslo using a Logman/Jenvey manifold, with top mounted linkages. Share this post Link to post Share on other sites
notamondayfan 44 Posted April 18, 2008 my linkages are on the top, and the bonnet only just closes after i cut away the inner cover. im looking for an auto bonnet as my one is knackered anyway. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted April 18, 2008 Give QEP a call, they have them in stk and have the servo take off fitted already Share this post Link to post Share on other sites
porter_bmx 0 Posted April 19, 2008 thanks, will have to see about the bonnet lol Share this post Link to post Share on other sites
