jonnie205 1 Posted April 11, 2008 Just fitting a gti6 with 6 speed box in 205, ime leaving the 306 pull type clutch. People have said the be1 clucth cable works well and is the right free length etc etc, I have seen be3 ones used spaced out with washers etc but has naybody tried a be1 cable Share this post Link to post Share on other sites
James_R 3 Posted April 11, 2008 Think Garry's used the Be1 cable set up on the std clutch, otherwise taylorpug just finished his with the pull clutch, could give him a ring. Share this post Link to post Share on other sites
maxi 36 1 Cars Posted April 13, 2008 Never used a BE1 cable mate. I have done it a few times using the BE3 cable and the ends from another donor cable. You basically end up with a double end on it if you get what I mean, this works out to just the right amount of spacing out. Maxi Share this post Link to post Share on other sites
whizzer71 0 Posted April 13, 2008 Something like this Share this post Link to post Share on other sites
jonnie205 1 Posted April 13, 2008 cheers for the replies, i am goin to try a be1 cable as i believe it has a shorter inner cable so no need for spacers etc, i will let you all know how i get on Share this post Link to post Share on other sites
whizzer71 0 Posted April 13, 2008 BE1 cable is different where it meets the clutch pedal It has a different yoke on it so if you plan on using this you will have to fit a pre 89 clutch pedal also Share this post Link to post Share on other sites
jonnie205 1 Posted April 13, 2008 yep indeed its a different pedal Share this post Link to post Share on other sites
