MerlinGTI 3 Posted April 5, 2008 Upon servicing the rear brakes this morning I discovered my passenger side rear brake pipe (the metal bit that goes to the cylinder) is seized in the also knackered wheel cylinder. I need a new one, phoned pug and they dont do them. I dont want to take my car to a garage and have one made because I dont trust anyone with my baby and it will be expensive. Can they be purchaced in the right length? or should I invest in a flaring tool and buy some pipe? Cheers Share this post Link to post Share on other sites
Tom Fenton 1,541 Posted April 5, 2008 I make my own, but otherwise you may find a local motor factor or garage can make you up a new pipe quite cheaply if you take the old one to them as a sample. Share this post Link to post Share on other sites
sussex_gti 0 Posted April 5, 2008 Just take it out complete and take it to a garage and get one made. Might as well do both sides while your there. Share this post Link to post Share on other sites
ORB 227 1 Cars Posted April 6, 2008 It will work out very well in your favour to buy a 5 metre roll of pipe, and a big bag of mixed conectors along with a flaring tool (decent one) You will be able to make all your pipes till your heart is content. Share this post Link to post Share on other sites
MerlinGTI 3 Posted April 7, 2008 can some one tell me what diameter pipe and what unions I need please cheers Share this post Link to post Share on other sites
Tom Fenton 1,541 Posted April 7, 2008 3/16" pipe, M10x1 unions. A decent motor factor will have both in stock. Share this post Link to post Share on other sites
jord294 92 Posted April 7, 2008 if your interested. i have a couple of new pipes made up for a drum brake back axle all they need is forming (shaping) pm me if your interested Share this post Link to post Share on other sites
MerlinGTI 3 Posted April 8, 2008 You have PM kind sir 'tidy' Share this post Link to post Share on other sites
